Performance and characteristics of high temperature resistance, the maximum temperature can reach 1800 ℃ high adhesion, and refractories combined with strong high emissivity, infrared emission rate of more than 0.9 5 good corrosion resistance, long life coating high abrasion resistance, impact resistance, excellent abrasion and strong acid corrosion coatings cured at room temperature, non-toxic, low thermal conductivity green Technical indicators thermal conductivity 0.3 W / mK Ph value 7-8 temperature 800 ℃ ~ 1800 ℃ coating density of 3.5 ~ 4.8g / cm3 Viscosity 0.5 ~ 2Pa. S linear expansion coefficient of 5.9 × 10-6 / K scope of application of the product not only for its excellent performance infrared radiation to improve industrial furnaces and furnace heat transfer process and improve the energy efficiency of industrial furnaces and their production capacity, but also lining material to protect and prolong the life of industrial furnaces, reduce production and maintenance costs and, ultimately, increase production, energy efficiency and the purpose of reducing production costs. This product can be widely used in furnace refractory lining work can be construction in bricks, refractory fiber and other surface. Can be used in ceramic kilns, all kinds of heat treatment furnace, sintering furnace refractories, laboratory furnace and the like. Instructions 1. Clean the surface to be brushed to remove dust and debris material surface. 2. Apply a coating solution with a brush, or part roll, brush or roller on the surface of the material, the material is greater than the thickness of the surface coating 50μm. 3. The selection of spraying, new materials, the initial spray should be sprayed 1-3 times, keep the coating thickness is greater than 50μm, secondary painting tables needed to be sprayed after last dry. 4. After the coating is applied to the table is placed in the air dry and then at a temperature of about 150 ℃ bake 3 hours or more, can be used after hard work to be coated, the coating is dry place for longer than two hours in the air. 5. the first time by 1 ~ 2 ℃ heating rate to a target temperature. Notes This product must be kept closed at 5 ~ 25 ℃ about the environment, avoid strong sunlight. Before using this product if settlement Stir well before using. The product packaging coatings: 5kg / barrel, 10kg / barrel, 25kg / barrel, 200kg / barrel The product shelf life of 12 months.