Performance and features with molten aluminum, magnesium, zinc and its alloys have excellent non-wetting extremely high lubricity, low coefficient of friction high-resistance, high chemical inertness good insulation properties, high temperature resistance, acid and alkali resistance, maintaining good lubrication under high temperature and an inert water-based paint, non-toxic and easy to clean technical indicators Appearance blue or white liquid Ph value of 6.5 to 8 Viscosity 0.5 ~ 4.5Pa. s maximum operating temperature oxidizing atmosphere 1000 ℃;. inert or reducing atmosphere 2200 ℃ solid content of 15 to 30 percent is ideal for a range of applications for protecting the molten aluminum during contact with the molten aluminum metal and non-metallic materials, such as aluminum water and protection of diversion tank; for aluminum and aluminum rod casting is also excellent lubricating and protective effect; stainless steel and heat-resistant steel protection. b. a high temperature lubricants, mold release agents, anti-slagging agent. c. as a protective agent in metal plating vacuum molding machine. d. as a protective agent in forging, casting, heat treatment and ceramic production. e. as the electrically insulating coating during sintering and annealing furnace. Instructions 1. Clean the surface to be brushed to remove dust and debris material surface. 2. Apply a coating solution with a brush, or part roll, brush or roller on the surface of the material, the material thickness is greater than the surface coating 30μm. For a thickness of 50μm or more, it can be repeated 2-3 times brushing. 3. After brushing the surface again boron nitride coating, brush coating amount can be reduced appropriately or 1: 1 was diluted with water and then brush or roller coating. The coating can be 1: 1 dilution with water sprayed on the material surface, the new material should be sprayed first spray 1-2 times, spray again after materials can be sprayed For one pass. 5. The method of coating a metal substrate can be used, you can spray 1 times. 6. After the coating can be applied to dry or at a temperature of about 200 ℃ baking in the air, it can be used after drying to be coated. 7. To brushing uniform coating, the coating surface can be used after drying A4 paper slightly polished, non-stick coating effect will be better. Notes This product must be kept closed at 5 ~ 25 ℃ about the environment, avoid strong sunlight. Before using this product if settlement Stir well before using. The product packaging coatings: 10kg / barrel, 25kg / barrel, 200kg / barrel The product shelf life of six months.